Home Faculty Faculty

 
Hsiharng Yang
Distinguished Professor
  1. Applied Science &Technology Building R608
  2. 04-22873629
  3. hsiharng@dragon.nchu.edu.tw
  4. Micro/Nano Machining Lab
  5. Publication List
 
Experience
Prof. Yang received his Doctor of Engineering degree from Louisiana Tech University (LaTech), USA in 1998. He served as a Researcher in the Industrial Technology Research Institute (ITRI) for MEMS product development. He has published more than 50 international journal papers and pending several patents.
Research Areas
Microlens fabrication, nano-fabrication, fuel cell, micro-bial fuel cell, carbon electrode
 
 
 
A. Journal Articles
  1. Ngoc Bich Duong, Chih-Liang Wang*, Li Zhen Huang, Wan Ting Fang, Hsiharng Yang*, “Development of a facile and low-cost chitosan-modified carbon cloth for self-pumping efficient enzymatic biofuel cells,” Journal of Power Sources, vol.429, pp.111-119, 01 2019. (SCI)
  2. Van Men Truong, Ngoc Bich Duong, Chih-Liang Wang*, Hsiharng Yang*, “Effects of cell temperature and reactant humidification on anion exchange membrane fuel cells,” Materials, vol.12, no.2048, pp.1-11, 01 2019. (SCI)
  3. Van Men Truong, Mingkun Yang, Hsiharng Yang*, “Functionalized carbon black supported silver (Ag/C) catalysts in cathode electrode for alkaline anion exchange membrane fuel cells,” International Journal of Precision Engineering and Manufacturing-Green Technology , vol.6, no.4, pp.711-721, 08 2019. (SCI)
  4. Van Men Truong, Chih-Liang Wang*, Mingkun Yang, Hsiharng Yang*, “Effect of tunable hydrophobic level in the gas diffusion substrate and microporous layer on anion exchange membrane fuel cells,” Journal of Power Sources, vol.402, pp.301-310, 01 2018. (SCI)
  5. Van Men Truong, Chih-Wei Yang, Hsiharng Yang*, “Carbon black and multi-walled carbon nanotube supported cobalt for anion exchange membrane fuel cell,” Journal of Technology Innovations in Renewable Energy 2018, vol.7, pp.1-6, 01 2018.
  6. Ngoc Bich Duong, Sheng-Li You, Li- Zhen Huang and Hsiharng Yang*, “Carbon nanotubes modified carbon cloth cathode electrode for self-pumping enzymatic biofuel cell,” Journal of Renewable Energy, vol.2018, 01 2018. (SCI)
  7. L.-Z. Huang, Ngoc Bich Duong, Jhang H. Wang , Hsiharng Yang*, “Polyethyleneimine modified carbon cloth anode for self-pumping enzymatic glucose biofuel cell,” Journal of Renewable Energy, vol.2018, 01 2018. (SCI)
  8. L.-Z. Huang, Y.-T. Chu, H. Yang*, “Erythrocyte separation using gravitational field flow effect,” Journal of Biomedical Science and Engineering, vol.10, pp.232-242, 01 2017. (SCI)
  9. Y.-F. Tsai, C.-J. Shieh, H. Yang*, “Capillary force pumping fluid for glucose oxidase enzymatic fuel cells,” Microsystem Technologies, vol.23, pp.3927-3935, 01 2017. (SCI)
  10. T.-H. Lin*, C.-K. Chao, H. Yang, “Fabrication of a micro-tip array mold using a micro-lens mask with proximity printing,” Microsystem Technologies, vol.22 (2), pp.413-418, 02 2016. (SCI)
  11. T.-Y. Chang, C.-H. Hung, Z.-J. Lian, H. Yang, “Using proximity exposure to produce asymmetrical lens for light control films,” Microsystem Technologies, vol. 21, pp.1893–1901, 01 2015. (SCI)
  12. S.Y- Hung, T.-Y. Chang, M.-H. Shen, H. Yang, “Tilted microlens fabrication method using two photoresists with different melting temperatures,” Journal of Micromechanics and Microengineering, vol.24, pp.25013-25023, 01 2014. (SCI)
  13. Z.-J. Lian, S.-Y. Hung*, M.-H. Shen, H. Yang, “Rapid fabrication of semiellipsoid microlens using thermal reflow with two different photoresists,” Microelectronics engineering, vol.115, pp.46-50, 01 2014. (SCI)
  14. C.-H. Kuo, W.-H. Huang, C.-K. Lee, Y.-C. Liu, C.-M. Chang, H. Yang* and C.-J. Shieh*, “Biofuel cells composed by using glu¬cose oxi¬dase on chitosan coated car¬bon fiber cloth,” International Journal of Electrochemical Science, vol. 8, no.7, pp.9242-9255, 01 2013.
  15. M.-Y. Shen, T.-Y. Chang, T.-H. Hsieh, Y.-L. Li, C.-L. Chiang, H. Yang, and M.-C. Yip, “Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites,” Journal of Nanomaterials, vol.9, 01 2013. (SCI)
  16. W. Liu, G.-Y. Lin, H. Yagn, “A study of the simulation of a light trapping module for increasing the absorption efficiency of solar cells,” Applied Mechanics and Materials, vol. 437, pp.198-201, 01 2013. (SCI)
  17. T.-H. Lin*, H. Yang, C.-K. Chao, H.-C. Shui, “New dual-curvature microlens array with a high fill-factor for organic light emitting diode modules,” Optics Communications, vol.304, pp.123-128, 01 2013. (SCI)
  18. T.-Y. Chang, C.-H. Hung, P.-S. Chang, M.-H. Yeh, H. Yang, “Asymmetric focusing microlens array fabricated using off-axis lithography,” Microsystem Technologies, vol.19, pp. 861-869, 01 2013. (SCI)
  19. W. Liu, S. Liu, H. Yang, Y. Wu, “Configuration optimization analysis of ultrasonic spray nozzle modules,” Disaster Advances, vol.6, no.13, pp.54-64, 12 2013. (SCI)
  20. C.-H. Hung, C.-H. Chiu, S.-P. Wang, I-L. Chiang, H. Yang, “Ultra thin gas diffusion layer development for PEMFC,” International Journal of Hydrogen Energy, vol. 37, no.17, pp.12805–12812, 01 2012. (SCI)
  21. C.-H. Hung, S.-Y. Hung*, M.-H. Shen and H. Yang, “Semiellipsoid microlens fabrication method using the lift-off and alignment exposure processes,” Journal of Micromechanics and Microengineering, vol.22, pp.105020-30, 01 2012. (SCI)
  22. C.-H. Hung, S.-Y. Hung*, M.-H. Shen and H. Yang, “Semi-ellipsoid microlens fabrication method using UV proximity printing,” Applied Optics, vol.51, no.8, pp.1122-1130, 01 2012. (SCI)
  23. T.-H. Tsai, H. Yang*, R. Chein, M.-S. Yeh, “Two-dimensional simulations of ion concentration distribution in microstructural electroforming,” International Journal of Advanced Manufacturing Technology, vol.57, pp.639-646, 01 2011. (SCI)
  24. T.-H. Lin, H. Yang*, C.-K. Chao, S.-Y. Hung, J.-S. Hsu, “New high fill-factor dual-curvature microlens array fabrication using UV proximity printing,” Microsystem Technologies, vol.17, pp. 601-607, 01 2011. (SCI)
  25. H. Yang*, C.-H. Hung, S.-P. Wang, and I-L. Chiang, “Graphite felt with vapor grown carbon fibers as electrodes for vanadium redox flow batteries,” Rare Metals, vol.30, pp. 1-4, 03 2011. (SCI)
  26. H. Yang*, H.-C. Tu, I.-L. Chiang, “Carbon cloth based on PAN carbon fiber practicability for PEMFC applications,” International Journal of Hydrogen Energy, vol.35, pp. 2791-2795, 01 2010. (SCI)
  27. T.-H. Lin, H. Yang*, C.-K. Chao, M.-S.Yeh, “New fabrication method of micro-pyramidal vertical probe array for probe cards,” Microsystem Technologies, vol.16, pp.1215-1220, 01 2010. (SCI)
  28. R. Chein*, H. Yang, T.-H. Tsai and C. Lu, “Experimental study of heat sink performances using copper foams fabricated by electroforming,” Microsystem Technologies, vol.16, pp.1157-1164, 01 2010. (SCI)
  29. F.-Y. Chang*, R.-H. Wang, H. Yang, Y.-H. Lin, T.-M. Chen, S.-J. Huang, “Flexible strain sensors fabricated with carbon nano-tube and carbon nano-fiber composite thin films,” Thin Solid Films, vol.518, pp.7343-7347, 01 2010. (SCI)
  30. C.-K. Chao*, J.-Y. Hu, S.-Y. Hung and H. Yang, “Theoretical prediction of fiber coupling for ellipsoidal microlens,” Journal of Mechanics, vol.26, no.1, pp.29-36, 03 2010. (SCI)
  31. Y.-F. Tsai, C.-J. Shieh, H. Yang*, “Capillary force pumping fluid for glucose oxidase enzymatic fuel cells,” Microsystem Technologies. (SCI)
  32. W.-H. Huang, C.-H. Kuo, C.-J. Shieh* and H. Yang, “Optimization of immobilized glucose oxidase for enzymatic bio-fuel cell,” International Journal of Green Energy. (SCI)
 
 
Back