Dung-An Wang
Distinguished Professor
- Applied Science &Technology Building R601
- 04-22840531 ext. 601
- daw@dragon.nchu.edu.tw
- Electromechanical Energy Laboratory
- Publication List
Experience
EXPERIENCES
Professor, Graduate Institute of Precision Engineering, NATIONAL CHUNG HSING University, Taichung,Taiwan 2013-now
Associate Professor, Graduate Institute of Precision Engineering, NATIONAL CHUNG HSING University, Taichung, Taiwan, 2010-2013
Assistant Professor, Graduate Institute of Precision Engineering NATIONAL CHUNG HSING University, Taichung, Taiwan, 2005-2010
Assistant Professor, Department of Mechanical & Automation Engineering, DA-YEH University, Da-Tsuen, Chang-Hua, Taiwan, 2004-2005
Research Assistant, Department of Mechanical Engineering, UNIVERSITY OF MICHIGAN, ANN ARBOR, MI, US, 1998-2004
Project Engineer, Advanced Engineering Analysis, NATIONAL STEEL, Livonia, MI, US, 2001
Teaching Assistant, Department of Mechanical Engineering, UNIVERSITY OF MICHIGAN, ANN ARBOR, MI, US, 2000
Teaching Assistant, Department of Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei , Taiwan, 1996-1997
Research Assistant, Department of Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei , Taiwan, 1994-1996
EDUCATION
Doctor of Philosophy in Mechanical Engineering, UNIVERSITY OF MICHIGAN, Ann Arbor, MI, US, 2004
Master of Science in Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei, TAIWAN, 1996
Bachelor of SCIENCE in Mechanical Engineering, NATIONAL SUN YAT-SEN UNIVERSITY, KAOHSIUNG,, TAIWAN, 1992
Professor, Graduate Institute of Precision Engineering, NATIONAL CHUNG HSING University, Taichung,Taiwan 2013-now
Associate Professor, Graduate Institute of Precision Engineering, NATIONAL CHUNG HSING University, Taichung, Taiwan, 2010-2013
Assistant Professor, Graduate Institute of Precision Engineering NATIONAL CHUNG HSING University, Taichung, Taiwan, 2005-2010
Assistant Professor, Department of Mechanical & Automation Engineering, DA-YEH University, Da-Tsuen, Chang-Hua, Taiwan, 2004-2005
Research Assistant, Department of Mechanical Engineering, UNIVERSITY OF MICHIGAN, ANN ARBOR, MI, US, 1998-2004
Project Engineer, Advanced Engineering Analysis, NATIONAL STEEL, Livonia, MI, US, 2001
Teaching Assistant, Department of Mechanical Engineering, UNIVERSITY OF MICHIGAN, ANN ARBOR, MI, US, 2000
Teaching Assistant, Department of Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei , Taiwan, 1996-1997
Research Assistant, Department of Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei , Taiwan, 1994-1996
EDUCATION
Doctor of Philosophy in Mechanical Engineering, UNIVERSITY OF MICHIGAN, Ann Arbor, MI, US, 2004
Master of Science in Mechanical Engineering, NATIONAL TAIWAN UNIVERSITY, Taipei, TAIWAN, 1996
Bachelor of SCIENCE in Mechanical Engineering, NATIONAL SUN YAT-SEN UNIVERSITY, KAOHSIUNG,, TAIWAN, 1992
Research Areas
Microelectromechanical systems (MEMS), Energy harvesters, Ultrasonic system design, Constitutive modeling of materials, Plastic behavior of materials, Fracture and fatigue
of structures.
of structures.
A. Journal Articles
- Dung-An Wang, Jyun-Hua Chen, Huy-Tuan Pham, “A tristable compliant micromechanism with a series combination of two bistable mechanisms,” Mechanism and Machine Theory, 01 2014. (SCI)
- Dung-An Wang, Hai-Dang Nguyen, “A Bézier Profiled Horn for Reducing Penetration Force in Ultrasonic Cutting,” Ultrasonics, 01 2014. (SCI)
- Huu-Tu Nguyen, Hai-Dang Nguyen, Jun-Yen Uan, Dung-An Wang, “A Nonrational B-Spline Profiled Horn with High Displacement Amplification for,” Ultrasonics, vol.54, pp.2063-2071, 12 2014. (SCI)
- Dung-An Wang, Jyun-Hua Chen, Huy-Tuan Pham, “A constant-force bistable micromechanism,” Sensors and Actuators A-Physical, vol.189, no.481-487, 01 2013. (SCI)
- Dung-An Wang, Chia-Wei Chao, Jyun-Hua Chen, “A miniature hydro energy generator based on pressure fluctuation in Kármán vortex street,” Journal of Intelligent Material Systems and Structures, vol.24, no.5, pp.612-626, 03 2013. (SCI)
- Hai-Dang Nguyen, Huy-Tuan Pham, Dung-An Wang, “A miniature pneumatic energy generator using Kármán vortex street,” Journal of Wind Engineering and Industrial Aerodynamics, vol.116, no.40-48, 05 2013. (SCI)
- Dung-An Wang, Hai-Dang Nguyen, “A Bézier Profiled Horn for Reducing Penetration Force in Ultrasonic Cutting,” Ultrasonics, vol.accepted, 05 2013. (SCI)
- Yue-Ting Chen, Dung-An Wang, Jun-Yen Uan*, Tsung-Hsien Hsieh, Te-Chang Tsai, “Tensile strength and deformation microstructure of Al-Mg-Si alloy sheet by through-width vibration rolling process,” Materials Science and Engineering A, vol.551, pp.296-300, 08 2012. (SCI)
- Dung-An Wang*, Chun-Yuan Chiu, Huy-Tuan Pham, “Electromagnetic energy harvesting from vibrations induced by Kármán vortex street,” Mechatronics, vol.22, pp.746-756, 09 2012. (SCI)
- Dung-An Wang*, Wei-Yang Chuang, Kei Hsu, Huy-Tuan Pham, “Design of a Bézier-Profile Horn for High Displacement Amplification,” Ultrasonics, vol.51, pp.148-156, 02 2011. (SCI)
- Huy-Tuan Pham, Dung-An Wang, “A quadristable compliant mechanism with a bistable structure embedded in a surrounding beam structure,” Sensors and Actuators A: Physical, vol.167, no.2, pp.438-448, 03 2011. (SCI)
- Dung-An Wang*, Nine-Zeng Liu, “A Shear Mode Piezoelectric Energy Harvester Based on a Pressurized Water Flow,” Sensors and Actuators A: Physical, vol.167, no.2, pp.449-458, 06 2011. (SCI)
- Dung-An Wang*, Fang-Wen Sheu, Yen-Sih Chiu, “In-plane vibration characterization of microelectromechanical systems using acousto-optic modulated partially incoherent stroboscopic imaging,” Optics and Lasers in Engineering, vol.49, no.7, pp.954-961, 07 2011. (SCI)
- Huy-Tuan Pham, Dung-An Wang, “A constant-force bistable mechanism for force regulation and overload protection,” Mechanism and Machine Theory, vol.46, no.7, pp.899-909, 07 2011. (SCI)
- D.-A. Wang, B. Liao, “Shaking assisted self-assembly of rectangular-shaped parts,” Journal of Materials Processing Technology, vol.210, pp.343-350, 01 2010. (SCI)
- D.-A. Wang, H.-H. Ko, “Piezoelectric energy harvesting from flow induced vibration,” Journal of Micromechanics and Microengineering, vol.20, pp.025019, 02 2010. (SCI)
- P.-C. Lin, D.-A. Wang, “Geometric Functions of Stress Intensity Factor Solutions for Spot Welds in U-Shape Specimens,” International Journal of Solids and Structures, vol.47, pp.691-704, 03 2010. (SCI)
- Dung-An Wang, Kai-Heng Chang, “Electromagnetic Energy Harvesting from Flow Induced Vibration,” Microelectronics Journal, vol.41, no.6, pp.356-364, 06 2010. (SCI)
- Dung-An Wang*, Chia-Wei Chao, Pai-Chen Lin, Jun-Yen Uan, “Mechanical Characterization of Friction Stir Spot Microwelds,” Journal of Materials Processing Technology, vol.210, pp.1942-1948, 11 2010. (SCI)
- Dung-An Wang, Cheng-Hua Chen, “Fatigue Lives of Friction Stir Spot Welds in Aluminum 6061-T6 Sheets,” Journal of Materials Processing Technology, vol.209, pp.367-375, 01 2009. (SCI)
- Dung-An Wang, Hua-Tsun Pham, Yi-Han Hsieh, “Dynamical switching of an electromagnetically driven compliant bistable mechanism,” Sensors and Actuators A: Physical, vol.149, pp.143-151, 01 2009. (SCI)
- Dung-An Wang, Hong-Hua Ko, “Magnetic-assisted self-assembly of rectangular-shaped parts,” Sensors and Actuators A: Physical, vol.151, pp.195-202, 04 2009. (SCI)
- R.-H. Ma, D.-A. Wang, T.-H. Hsueh, C.-Y. Lee, “A MEMS-based flow rate and flow direction sensing platform with integrated temperature compensation scheme,” Sensors, vol.9, pp.5460-5476, 07 2009. (SCI)
- D.-A. Wang, W.-Y. Chuang, K. Hsu, H.-T. Pham, “Design and analysis of a Bezier-profile horn,” Journal of Engineering, National Chung Hsing University, vol.20, pp.161-169, 11 2009.
- P.-C. Lin, D.-A. Wang and J. Pan, “Mode I Stress Intensity Factor Solutions for Spot Welds in Lap-Shear Specimens,” International Journal of Solids and Structures, vol.44, pp.1013-1037, 02 2007. (SCI)
- D.-A. Wang and S.-C. Lee, “Microstructures and Failure Mechanisms of Friction Stir Spot Welds of Aluminum 6061-T6 Sheets,” Journal of Materials Processing Technology, vol.186, pp.291-297, 05 2007. (SCI)
- D.-A. Wang, C.-H. Cheng, Y.-H. Hsieh, C.-T. Chang, “Analysis of an annular PZT actuator for a droplet ejector,” Sensors and Actuators A: Physical, vol.137, pp.330-337, 07 2007. (SCI)
- D.-A. Wang and J. Pan, “A Non-Quadratic Yield Function for Polymeric Foams,” International Journal of Plasticity, vol.22, pp.434-458, 03 2006. (SCI)